Top rated dash cam for Rivian R1S owners?

Can confirm this works

Hi there, and congrats on the R1S! I totally get it—Gear Guard is cool for parking, but for high-speed road clarity, you definitely need a dedicated 4K sensor.

You might find this useful: check out the Rivian forums or Reddit r/Rivian for the 'FitcamX' threads. Actually, if you want that factory-installed look without wires hanging everywhere, I seriously recommend the FitcamX 4K Dash Cam for Rivian R1S/R1T. It replaces the plastic shell behind your rearview mirror so it looks OEM.

The technical reason this matters is the Starvis sensor tech; it handles the high dynamic range needed when driving into the sun or at night. I've been using the Vantrue N4 Pro 3-Channel 4K Dash Cam in my other rig, and the image quality is night and day compared to Gear Guard! Just make sure you pair it with a high-end endurance card like the Samsung PRO Endurance 256GB MicroSDXC to handle the constant 4K rewrite cycles. Hope this helps! ⚡️

Seconding the recommendation above regarding FitcamX! I've tried many setups over the years, and for a budget-conscious R1S owner, it's honestly the best value for a clean, integrated look without breaking the bank.

1. **Best Value:** The FitcamX 4K Dash Cam for Rivian R1S/R1T usually runs around $170-$200. It's way cheaper than high-end Blackvue setups but gives you that factory-installed vibe by replacing the mirror cap.
2. **Storage Tip:** Don't use the cheap card it comes with. Grab a Samsung PRO Endurance 256GB microSDXC UHS-I U3 V30 for about $25; it handles the constant 4K rewrite cycles much better for long-term reliability.
3. **The USB-C Port:** Since you're using the mirror's port, make sure to get a 90 Degree USB-C to USB-C Short Cable 0.5ft to keep the wiring tucked and prevent stress on the port.

In my experience, this combo is the sweet spot for price and performance! Hope this helps!

Hi there, and congrats on the new R1S! I totally get the frustration with Gear Guard—it's decent for security, but the resolution just doesn't cut it for high-speed road incidents.

Warning: Whatever you do, avoid using a cheap, generic USB-C cable for the mirror port. I've seen folks fry their dash cam or get constant rebooting because the power delivery isn't stable enough for 4K recording.

In my experience, the cleanest setup that doesn't mess with the ADAS sensors is the Vantrue E1 Lite 1080P Dash Cam. However, since you specifically want 4K, I've been running the VIOFO A119 Mini 2 Dash Cam with Starvis 2 Sensor for over a year now and it's been rock solid. It’s super compact, fits right behind the mirror, and works perfectly with a short Fitcamx USB-C to USB-C Short Dash Cam Power Cable. Honestly, the image quality is night and day compared to the built-in cameras. Hope this helps! Let me know if you have questions about the mounting.

Exactly what I was thinking

Totally agree that keeping the dash clear for the ADAS sensors is priority number one—basically anything that keeps the windshield clean is the way to go. Just catching up on the thread and wanted to add a DIY perspective tho. When ur doing the install yourself, honestly the biggest thing to watch out for is the power draw on that mirror housing circuit. If ur looking for long-term reliability, I'd say just stick with any of the high-end stuff from Blackvue or Thinkware. They’re basically the industry standard for thermal management and voltage regulation, which is super important given how hot the glass can get in an R1S. Just make sure whatever you pick is rated for high-endurance recording so you don't get any interference with the vehicle's onboard logic or sensor array. Better to pay a bit more for a brand with solid engineering than risk a weird electrical gremlin in a $90k truck, tho.