Any essential camping accessories specifically for the Volkswagen ID. Buzz?

Saw this earlier but just now responding... honestly, you dont need the fancy stuff to stay safe. I would suggest:

- Mattress: Zinus 4 Inch Green Tea Memory Foam Tri-Fold Mattress is about $90 and fits the flat floor well.
- Blinds: FuelLagoon ID. Buzz Internal Thermal Screens are roughly $75 and actually stay put.

Be careful with cheap thin pads tho, they wont insulate and ur battery will drain fast trying to keep you warm. gl!

In my experience over the years, you gotta prioritize space. i've compared a few setups:

- Mattress: Dreamer Mattress ID. Buzz Custom Fit vs generic pads. Custom fits those weird contours perfectly.
- Blinds: Project Camper Magnetic Thermal Blinds vs suction types. Magnetic is faster and way more compact.

Best choice is the magnetic blinds... pricey but highkey worth it for storage. use the Stationary Climate for range too. gl!

Sooo stoked for you getting the Buzz next month! Ngl, the massive glass is amazing for the views but basically turns the car into a greenhouse or an ice box depending on the weather lol. Since you're looking for alternatives to the usual stuff, I gotta mention the VanEssa Mobilcamping Comfort Mattress for VW ID. Buzz. Ive tested a lot of foams over the years and this one is actually high-density enough that you dont feel the seat hinges at all, which is a HUGE win for your back.

For the windows, check out the Brandrup ISOLITE Inside for VW ID. Buzz. Theyre super lowkey and use a hook-and-loop system that creates a literal air cushion between the glass and the mat. It's way better for thermal insulation than basic suction cups which ALWAYS fail at 3 AM. Plus, they pack down surprisingly small if you fold 'em right.

Technical tip: if youre worried about range, dont use the internal 230V socket for high-draw appliances like induction stoves if you can avoid it. I usually bring an EcoFlow Delta 2 Max Portable Power Station to handle the heavy cooking. It keeps the main traction battery for driving and basically eliminates range anxiety while camping. Honestly, the range loss from the stationary climate is usually only like 1-2% per night anyway, so dont stress that part too much!!

Are you planning on doing mostly campsites with hookups or going totally off-grid? That makes a big difference for how you should pack your storage! Cheers

Just sharing my experience: I went through this last year. Basically, you gotta think about thermal mass. Since the Buzz has such huge windows, the climate control has to work overtime to keep you comfy, which can highkey drain your range overnight if you aren't insulated well.

I tried a few budget setups to save cash, but honestly, I was kinda disappointed with the cheap stuff I bought initially. Here is how I’d compare the mid-range stuff I’ve used:

* Exped MegaMat Duo 10 M vs. Generic foam: The Exped is amazing because it actually provides a high R-value for insulation, saving your battery. But, it doesnt perfectly fill the ID. Buzz floor gaps like the custom ones mentioned earlier.
* Wolf-Pack ID. Buzz Thermal Window Blinds vs. Cheap suction sets: I had issues with the cheap suction cups failing at 3 AM and scratching my trim. These are way better quality, but unfortunately, they still take up a lot of space when you aren't using them.

I mean, it's a bit of a trade-off between price and storage. Ngl, I wish I'd just spent the money on the magnetic ones from the start. gl! 👍

Tbh I've been spending way too much time measuring the back of my Buzz trying to figure out a DIY setup. Those pre-made kitchen boxes are nice but they're so heavy and I'm worried about the range hit from the extra weight, you know? I'm basically trying to build my own modular system using 80/20 Aluminum T-slot because it’s super light and adjustable. It's been a bit of a learning curve since I'm new to this, but I realized that if you build it yourself, you can actually leave gaps for the vents under the seats... wait no, I think they're more like air circulation vents for the cabin, but either way, you don't want to block them. I’m still trying to get the height exactly right so it sits flush with the folded seats. It’s a bit of a puzzle because the interior plastic is kinda curved, right? It feels way more rewarding than just buying a kit, even if my cuts aren't perfect yet. Has anyone else tried building their own platform instead of going the professional route? I'm still figuring out the best way to anchor everything to the floor rails without scratching the trim, it's tougher than it looks lol.

Exactly what I was thinking