Check out the Mitsubishi Parts Warehouse website for a look at the Genuine Mitsubishi Mirage Side Window Deflectors MZ562905EX. NGL, I'm a safety-first guy and the OEM ones are designed specifically for our car's tight sensors... less chance of the window bouncing back! If those are too pricey, Heko In-Channel Wind Deflectors for Mitsubishi Mirage are a solid alternative. Just be careful with the install and *really* clean the channels first or they'll whistle like crazy lol. gl!

Respectfully, I'd consider another option before you drop big bucks on those in-channel ones. I've been messing with subcompacts like the Mirage for years, and honestly, I've had a totally different experience with the "sensor issue" than the other guys. The Mirage has such tight window tolerances that those thick in-channel guards can reallyyy stress the motor over time, even if you get the anti-pinch to behave. Plus, at $100? That's a lot of gas money lol.

In my experience, if you want that sleek look without the sensor headache or the high price tag, you should check out the EOS Visors JDM Style Tape-on Window Deflectors. They're "JDM style," meaning they're much slimmer than the chunky old-school ones, so they lowkey look like in-channels but they stick to the outside.

EOS Visors JDM Style vs. Auto Ventshade AVS Ventvisor Low Profile:
- EOS: Super affordable (usually under $50), very slim profile, but you gotta be careful with the 3M tape install.
- AVS Low Profile: A bit more expensive, but the plastic is way more durable against UV fading in the long run.

Basically, if you prep the surface with rubbing alcohol, those tape-on ones aren't gonna fly off, I promise. I've had a set on my daily for three years and they havent budged. Save yourself the $40 and the frustration of your windows bouncing back down every time you try to close 'em! Just my two cents tho... good luck with the new ride!! 👍

So I have been doing my own mods for years and honestly, you dont need to drop $100 plus labor at a shop to get a clean look on a Mirage. I remember trying to save a buck on my first build and learned the hard way that the prep work is basically 90 percent of the battle. If ur doing it yourself, you can get a pro result for half the price of the big name brands if you just take your time with the install.

• I usually look for WellVisors Side Window Deflectors because they use a clip and tape combo system that feels way more secure than just the adhesive alone.
• I always use a heat gun or even just a hair dryer on the 3M tape for a few seconds before pressing it down to make sure the bond is permanent.
• Cleaning the trim with 90 percent isopropyl alcohol is a must to get rid of any wax or dealer detailer spray or they will definitely peel off eventually. Basically, taking an hour on a Saturday to do the install myself saved me enough cash to cover my next oil change. It is a super easy DIY project that really changes the profile of the car without stressing ur budget too much.

Honestly, for your situation, I'd go with the WeatherTech Side Window Deflectors Dark Smoke set. I put 'em on my Mirage and they fit great. They're in-channel, so they look super sleek and don't peel off like tape-on ones do in the heat!! The anti-pinch sensor was a bit finicky at first, but if you leave the windows up for 48 hours like the manual says, it works fine. Basically zero wind noise too. Peace!

Seconding the recommendation above! WeatherTech is basically the gold standard, but since you're worried about the anti-pinch sensors on the Mirage, I've got a couple other thoughts after years of messing with these things.

1. In-Channel: WeatherTech Side Window Deflectors look the cleanest tbh. But yeah, they can be a bit of a pain with sensors until the seals stretch out.
2. Tape-on: AVS Ventvisor Outside Mount Window Deflectors are a solid alternative. They don't touch the window glass at all, so ZERO sensor issues, but they do stick to the paint.

Honestly, I'd go AVS if you want a guaranteed easy install, but WeatherTech if you want that integrated look. Just be patient with the windows for the first 24 hours!