Best window wind deflectors for the Mitsubishi Mirage G4 sedan?

Ok so, I went through this last year with my G4. Honestly, I tried the Auto Ventshade AVS Ventvisor Outside Mount 194761 cuz they were cheap, but unfortunately, the tape started peeling at highway speeds and it was a total mess. I switched to the in-channel Mitsubishi Motors Genuine Mirage G4 Side Window Deflectors MZ380614EX, and while they look sleek, they actually did trigger my window sensors a few times... kinda annoying tbh. Just make sure you clean the channels realy well or they wont sit right!!

Seconding the recommendation above about being careful with the fitment!! I've seen way too many people jam in-channel ones that end up messing with the anti-pinch sensors on newer G4s... it’s a total headache when the window basically refuses to stay up cuz it thinks an object is in the way.

As a technical guy, I'm always looking at the mounting hardware and structural integrity. If you're worried about that highway rattle or losing a visor at 70mph, I'd suggest checking out these alternatives that prioritize safety and a secure fit:

1. WellVisors Window Deflectors with Black Trim for Mitsubishi Mirage G4 2017-2024 - These are great because they use a 'hybrid' mounting system. You get the 3M tape PLUS metal clips that hook into the window frame. It basically guarantees it wont fly off, which is a huge safety plus imo.
2. EGR Matte Black In-Channel Window Deflectors 573455 - These are CNC-machined for a crazy precise fit. They're thinner than the cheap brands, so they don't stress the window motor or sensors as much.

Just make sure to clean the channel with isopropyl alcohol first or the adhesive wont bond right. gl!

TIL! Thanks for sharing

Yo! Congrats on the new 2023 G4, such a solid little car!! For your situation, I would suggest looking at the different mounting styles cuz it really comes down to your preference for looks vs. ease.

I’ve tried both over the years and honestly, the WeatherTech Side Window Deflectors 80757 are basically the gold standard for in-channel. They look so sleek and highkey don't rattle at all! But yeah, sometimes the sensors get fussy if you don't seat them perfectly. On the flip side, I've used the WellVisors Window Deflectors for Mitsubishi Mirage G4 which are tape-on but have these tiny clips for extra security. They don't touch the glass so no scratches ever!

Basically, if u want that low-profile look, go WeatherTech. If ur worried about the window motor, WellVisors are amazing and super durable. Just make sure to prep the surface with alcohol first so they stick forever! good luck 👍

I've been following this thread and ngl, the debate between in-channel and tape-on really boils down to aesthetic vs. mechanical clearance. From a technical standpoint, the anti-pinch sensors on the G4 are calibrated for specific resistance levels, so any in-channel obstruction can easily throw off the hall-effect sensor's logic. I’ve seen way too many DIY installs fail because people rush the prep work. When I installed the set on my current setup, I was super cautious about the surface tension. I spent about an hour just cleaning the trim with 70% IPA to ensure zero contaminants. If the ambient temp is below 60°F, the adhesive won't reach its full bond strength, which is usually why they fly off on the highway. I also made sure to let the windows stay up for a full 48-hour curing period to let the gaskets reform around the flange. Honestly, if ur gonna do it yourself, don't skip the adhesion promoter or the heat gun prep. Being an enthusiast is great, but if u don't follow the thermal expansion specs, ur just gonna end up with rattles or a sensor error. It’s definitely a project where a professional level of patience pays off.

I totally agree with the point about the sensors and prep work because that is where most people mess up their long-term experience. After owning several Mitsubishis over the last decade, I have seen how the cheap stuff turns purple or gets brittle after just a few years of sun exposure. If you want something that actually stays put without stressing the window motors, you really need to look at the hybrid mounting styles. From my experience as a long-term owner, here is what actually matters after three or four years:

• Opt for any reputable JDM-style brand like HIC that uses those small metal clips along with the tape.
• Stick with brands that use high-quality acrylic because they wont cloud up when you use glass cleaner.
• Look for the low-profile designs to minimize that annoying wind whistle you get at 80mph on the highway. Honestly, just get any set from a brand like EGR or HIC and spend way more time than you think you need on the surface prep. If you dont use an adhesion promoter on the rubber seals, the tape will eventually fail during a car wash or a heavy storm, and nobody wants a visor flying off on the freeway lol.