Any good aftermarket exhaust tips for the 2024 Macan?

For your situation, I would suggest looking at Soul Performance Macan 95B.3 Bolt-On Deluxe Quad Exhaust Tips. I literally just put these on my 2024 and the fitment is *perfect* with the rear diffuser. Make sure to double-check the inlet diameter cuz Porsche changed things slightly on the 95B.3 generation. Honestly, the Fabspeed Porsche Macan Carbon Fiber Deluxe Quad Style Tips are highkey better if you want that aggressive carbon look tho. gl!

Honestly, after messing with Macan exhausts for years, I'd say just stick with Akrapovič if ur looking for that premium carbon fiber finish. It's basically the gold standard for fitment. Be careful tho—the 2024 bumper heat shield is tight, and cheap tips will literally melt ur trim if they aren't lined up right. I always tell people to check the clamp quality first cuz vibration is the real killer here!! Peace.

> I’m looking for high-quality black chrome or carbon fiber options that are easy to bolt on.

Quick question—are you mostly looking for the aesthetics, or are you hoping for a bit more sound too? Before I give advice, honestly, you gotta be careful because the *cost* of some of these tips is basically half the price of a whole new muffler setup, which is kinda wild.

Also, a huge WARNING: I've seen guys buy the cheaper carbon fiber stuff on eBay and they literally yellow or crack from the heat within a few months... totally not worth the "savings" lol. If you're budget-conscious, sometimes just powder coating the stock tips black is the move. But yeah, let me know if you have the base Macan or the S/GTS because the pipe diameter is different and it'll save you from ordering the wrong thing and dealing with return shipping. gl! 👍

Seconding the recommendation above regarding the heat shield! Honestly, I'm pretty new to the Macan world myself, but I spent weeks researching the market before I pulled the trigger. I found that most high-end brands are basically fighting over the same 95B.3 bumper clearance issues. I ended up getting a set of black chrome tips from a smaller boutique brand and was sooo worried about the rattle, but as long as you leave like a 5mm gap, you're fine. Just make sure to measure ur inlet twice cuz it's tricky!

For your situation, I gotta stress the technical side because the 2024 Macan (95B.3) has a really tight clearance around that rear diffuser! Honestly, if you dont get the spacing right, you'll literally melt your trim or cause a nasty rattle at high RPMs. I highly recommend checking out the Remus Sport Exhaust Carbon Tailpipe Set 102mm.

They use a specialized thermal clamp system that keeps the heat transfer away from the bumper, which is a total lifesaver for the new sensors back there. Plus, the 102mm size fills out the cutout perfectly for that aggressive look your after!! Seriously, just make sure ur double-checking the inlet diameter before you torque everything down. Good luck with the build, the black chrome looks sick on the 2024s!

Just catching up on this thread. Honestly, before you buy anything, are you planning to do the install yourself or are you having a shop do it? In my experience, the 2024 rear end is a bit finicky for a DIY job if you havent done it before. If you want my two cents, just go with Techart. You really cant go wrong with them. Over the years Ive tried many different setups and their build quality is basically the only one I trust not to rattle or discolor after a few thousand miles. Im usually pretty conservative about modding my cars, but their stuff is reliable. Just make sure you double check the fitment for the 95B.3 because porsche changed the bumper layout just enough to be annoying.