Recommended ambient lighting kits for the Volkswagen ID.7 interior?

In my experience, getting that high-end look in an EV like the ID.7 is all about finding kits that don't mess with the clean lines of the dash. Over the years, I've tried many cheap LED strips and they honestly look like a messy DIY job after a month. For your situation, I'd suggest looking at the Govee DreamView G1 Gaming Light G6021 setup or similar car-specific kits from brands like PimpMyEV Ambient Lighting Kit for VW ID series. Basically, these kits use ultra-thin fiber optics that tuck right into the gaps of the center console without any glue.

I mean, if you want it to feel premium, you gotta go for a 12V plug-and-play system that has a solid app. Ngl, syncing it perfectly with the factory infotainment is tough without heavy coding, but most decent apps let you match the HEX color code of the VW lighting exactly. It looks sooo much better when the door pockets actually pop!! Just take your time with the wiring and it'll look factory. gl!

I went through this last year with my previous EV, and honestly, I learned the hard way that going cheap is a huge mistake. I spent a weekend trying to tuck those generic $20 strips into the door pockets of my ID.4, but they kept peeling off and looked sooo messy at night. I basically wasted $50 on random kits before I realized that if you want it to look OEM, you gotta focus on the controller quality. For my ID.7, I decided to be way more cautious about the budget vs. quality balance.

Quick tip: prioritize kits with "black-circuit" PCB strips because they're invisible during the day against the ID.7's dark trim. Also, make sure to look for a 12V hardwire kit with a physical fuse tap rather than just plugging into the USB-C ports, otherwise, you'll have wires trailing everywhere and it totally ruins the premium vibe lol.

I eventually looked into the Govee DreamView M1 RGBIC LED Strip Light for the footwells and some Type S Smart LED Interior Lighting Kit components for the console. It took more time to hide the wires, but it was way cheaper than a custom shop job and actually stays hidden. Tbh just take it slow and dont rush the tucking process...

Bump - same question here

Did this last week, worked perfectly

Been looking at the ID.7 interior schematics and those door pocket gaps are actually pretty tight compared to the older ID.4 layouts... it makes a clean DIY job a bit of a challenge if you're not careful. Before you dive into a specific kit, I gotta ask: how comfortable are you with actually popping off a few trim panels to hide the wiring properly?? Or are you strictly looking for a 'no-tools' setup that just tucks into the seams? Also, are you aiming for a 'dynamic' chasing effect (similar to how the ID.Light strip moves) or just a solid color that matches the rest of the cabin? Tbh, the power draw on some of the higher-end addressable LED setups can be a bit much for a simple plug-and-play thing if you're wanting that true premium look without flickering...

Late to the party but I've been looking into this for my own ID.7 too. Honestly, I'm kinda nervous about messing with the electronics in such a high-tech car... dont want to void any warranties or cause a parasitic drain on the battery if I tap the wrong wire.

• i think i saw someone on another board mention that the id7 trim is way tighter than the id4 so you might need those really thin fiber optic strands instead of the thick led strips to get it to fit flush
• not sure but i heard the infotainment sync usually requires a specialized decoder box if you dont want to be stuck using a phone app all the time
• id definitely suggest using a fuse tap for any diy work just to keep things safe and easy to pull out if you ever need to take it for service Im still trying to decide if i want to risk it myself but let me know if you find a setup that actually looks factory. ill keep digging too and can share what i find if you need more info.

Facts.